alexa Nanomaterials for Pharmaceuticals Determination | Open Access Journals
ISSN: 2167-7662
Bioenergetics: Open Access
Make the best use of Scientific Research and information from our 700+ peer reviewed, Open Access Journals that operates with the help of 50,000+ Editorial Board Members and esteemed reviewers and 1000+ Scientific associations in Medical, Clinical, Pharmaceutical, Engineering, Technology and Management Fields.
Meet Inspiring Speakers and Experts at our 3000+ Global Conferenceseries Events with over 600+ Conferences, 1200+ Symposiums and 1200+ Workshops on
Medical, Pharma, Engineering, Science, Technology and Business

Nanomaterials for Pharmaceuticals Determination

Tawfik A. Saleh*

Department of Chemistry, King Fahd University of Petroleum & Minerals, Dhahran, Saudi Arabia

*Corresponding Author:
Saleh TA
Department of Chemistry, King Fahd University of Petroleum & Minerals
Dhahran 31261, Saudi Arabia
Tel: +966-13 860 1734
Fax: 966-13 860 1734
E-mail: tawfik@kfupm.edu.sa

Received date: May 28, 2016; Accepted date: June 23, 2016; Published date: June 25, 2016

Citation: Saleh TA (2016) Nanomaterials for Pharmaceuticals Determination. Bioenergetics 5:226. doi:10.4172/2167-7662.1000226

Copyright: © 2016 Saleh TA. This is an open-access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.

Visit for more related articles at Bioenergetics: Open Access

Abstract

Nanomaterials play an important role in the fabrication of many devices and modified materials, due to their unique properties, such as a large surface area/volume ratio and their high mechanical strength. The applicability of nanomaterials in drug determinations is being well investigated. This review provides a summary of the synthesis methods, characterization routes, and applications toward drugs. Nanomaterials have been investigated for their applications with electrochemical and spectroscopic systems for drug determinations.

Keywords

Nanomaterials, Synthesis, applications, drugs

Introduction

A nanomaterial is a broad term given to the materials found at the nanoscale. It is a material that has a unit size between the ranges of 1-100nm. Nanomaterials can be naturally occurring or chemically, mechanically, physically, or biologically synthesized with various structures, Figure 1. The various structures of carbon-based nanomaterials are depicted in Figure 2.

bioenergetics-synthesis-nanoparticles

Figure 1: Different methods for the synthesis of nanoparticles.

bioenergetics-carbon-based-nanomaterials

Figure 2: Various structures of carbon-based nanomaterials.

A simple classification of nanomaterials is based on their structures includes zero dimension, one dimension, two dimensions, and three dimensions. Nanoparticles have unique chemical and physical properties as compared to their solid bulk materials because of their high surface area, and electronic properties in addition to the controlled morphology.

Figure 3 presents examples of various morphological structures of nanomaterials. These particles have been utilized in many applications, for example, electrochemistry, photochemical, and biomedicine [1-3]. Nanoparticles have many functional platforms, and they can be utilized for imaging and therapeutic functions. These platforms can be prepared from various inorganic and organic materials, but the inorganic platforms are very important for simultaneous therapy and diagnosis because of their easy modification, high drug loading capacity, and stability [4].

bioenergetics-various-morphologies

Figure 3: Nanomaterials with various morphologies.

In addition, nanoparticles can be used for targeted drug delivery and the metallic nanoparticles respond resonantly to the magnetic field because they have very small sized particles, to transfer in the tumor cells as hyperthermia agents [5]. Nanomaterials can be utilized for the determination of the drugs [6-9].

Synthesis of the Nanomaterials

There are two different approaches to preparing nanomaterials- the bottom-up approach and the top-down approach. In the bottom-up approach, the nanoparticles are first obtained at the atomic level and later integrated into the desired material. The top-down approach starts with a bulk material at the macroscopic level followed by trimming of the material to the desired nanoparticles.

Many methods can be used for the synthesis of nanoparticles including chemical, physical, photochemical and biological procedures [10-17]. The type of method and the experimental conditions determine the shape and the size of the nanoparticles. The selection of any of these methods in terms of costs, scalability, particle sizes and size distribution should be considered. Generally, chemical methods provide an easy way to synthesize nanoparticles in solution.

The most widely used chemical methods for the synthesis of nanoparticles are (i) solid-state reaction; (ii) sol-gel technique; (iii) solvothermal method; (iv) hydrothermal method; and (v) molten salt method.

The most widely used physical methods for the synthesis of nanoparticles are dry and wet mechanical grindings which are methods of choice for inexpensive nanoparticle preparation. For technological applications, wet grinding is preferable because it allows more options to control the size of the nanoparticles.

In the physical methods generally, it is required to have; (i) raw material to grind; (ii) surfactant to cover the particle surface and prevent their aggregation and overheating during grinding, example is oleic acid; and (iii) fluid carrier where both raw material and surfactant are mixed with fluid carrier; example is heptane.

Physical-chemical methods are also used to prepare nanoparticles with controllable sizes and shapes a combination of chemical methods with external physical factors (for example, a chemical reaction in the presence of electromagnetic fields or mechanical milling) is needed.

Biological methods are used to prepare some kinds of nanomaterials. It allows the production of very small nanoparticles (5-10 nm). Biological methods are proposed as eco-friendly “green” alternatives to existing chemical and physical methods. The biosynthesis of different types of nanoparticles are available [18,19]. It should be mentioned that during the preparation of the nanomaterials, safety precautions should be considered as the nanoparticles may penetrate and cause some effects [20,21].

Characterization of the Nanomaterials

Various techniques are being utilized for the characterization of nanomaterials including X Ray Diffraction (XRD), field emission scanning electron microscope (FESEM), high resolution transmission electron microscope (HRTEM), Energy-dispersive X-ray spectroscopy (EDX), X-ray photoelectron spectroscope (XPS).and infrared transform absorption spectrometer (FTIR); to explain the morphology of the composites, crystalline phases and average size [22,23].

The morphology of the composites can be characterized by SEM, AFM and TEM. Examples of different morphologies are depicted in Figure 3. The presence of functional groups on the surface of nanotubes can be carried out by FTIR, Raman, XPS and EDX. The thermal stability cab be studied by thermogravimetric (TGA). The surface area, porosity, pore size and pore distributions can be evaluated by physisorption and chemisorption analyzers. Temperature programmed desorption (TPD) analyses determine the number, type and strength of active sites available on the surface of a nanomaterial by measuring the amount of gas desorbed at various temperatures.

If multiple active materials are present, the gas desorbs at different temperatures. Temperature programmed reduction (TPR) determines the number of reducible metal species present in the nanomaterial and the temperature at which reduction occurs. This can be performed by measuring the amount of analysis gas (like hydrogen) that reacts with the catalyst at different temperatures. Temperature programmed oxidation (TPO) provides the extent to which the nanomaterials can reoxidize.

Nanoparticles are being developed for a range of healthcare product applications including drug delivery, controlled release systems, and medical devices. These products present multiple challenges for product characterization that require sophisticated analytical techniques operated by experienced analysts, Figure 4.

bioenergetics-nanomaterials-characterization

Figure 4: Various techniques for the nanomaterials characterization

Application of the Nanomaterials in Drugs Analysis

The discovery of nanomaterials such as carbon-based nanomaterials, including carbon nanotubes, and graphene, have garnered tremendous interest for their potential in the design of high performance spectroscopic and electrochemical sensor platforms due to their exceptional thermal, mechanical, electronic, and catalytic properties. There are various analytical techniques for drugs determination including (i) titrimetric techniques, (ii) chromatographic techniques such as thin layer chromatography, highperformance liquid chromatography and gas chromatography; (iii) spectroscopic techniques such as spectrophotometry, near infrared spectroscopy, nuclear magnetic resonance spectroscopy, fluorimetry and phosphorimetry; (iv) electrochemical methods; (v) electrophoretic methods; and (vi) flow injection and sequential injection analysis. Figure 5 depicts classification of general analytical techniques for drugs determination.

bioenergetics-drugs-determination

Figure 5: Classification of general analytical techniques for drugs determination

Electrochemical sensors and biosensors

Several methods have been developed for the determination of drugs such as chromatographic techniques, spectrophotometry and capillary zone electrophoresis. However, most of these methods need expensive and sophisticated instruments and are time consuming, and in many cases, due to their relatively low sensitivities, they need a preliminary pre-treatment step, which is laborious and expensive.

Electroanalytical techniques are excellent and well known methods for ketoconazole determination in pharmaceutical formulations, cosmetics and in biological fluids by lower cost, shorter analysis time and no need of sample pretreatment compared to chromatographic techniques. The ketoconazole electrochemical properties were studied with the application of polarographic and Voltammetric techniques. The electrochemical methods described in the literature for determination of drugs such as ketoconazole were the use of mercury electrode, silver solid amalgam electrode carbon paste electrode, platinum, gold and glassy carbon electrode [24-29]. The sensitivity of the said methods permits them to be applied for determining ketoconazole in blood, urine, pharmaceutical preparations, and cosmetics. In the electroanalytical determination of pharmaceutical products, the foremost drawback is related to electrode surface fouling due to adsorption of the reactants from the solution interface or the reaction products of the electrochemical reactions, which leads to low sensitivity and reproducibility. In recent years, the increasing use of carbon paste electrodes (CPEs) modified by nanomaterials for electroanalytical measurement of a variety of organic species of biological and pharmaceutical importance has been reported [30-33].

The materials and biomaterials with rich nanostructures not only improve the electronic properties and increase the effective electrode surface for transferring electrochemical signal but also produce detectable signals for indirect detection of targets. Nanotechnology has advanced the progress of electrochemical sensors and biosensors. Nanomaterial-modified detection systems represent a chief driver towards the adoption of electrochemical methods, since nanomaterials enable functional tunability, ability to self-assemble, and novel electrical, optical and catalytic properties that emerge at this scale. This results in tremendous gains in terms of sensitivity, selectivity, and versatility because the nano-sized modifiers influence the electron transfer. Example is the use of nanowires for the development of efficient electrochemical sensors and biosensors due to their advantages such as mechanical stability, lightweight, enhancement in the current, reduction in potential. Functional nanowire arrays constitute one of the most fascinating nanotechnology [34]. Compared to other methods, such as spectroscopy and chromatography, the electrochemical measurements are relatively cheaper, simpler, and easier to miniaturize, which makes them more suitable for portablebased detection. Various strategies are used to improve the efficacy of sensing. Signal amplification for detection to utilize nanomaterials as carriers or tracers, catalysts, and electronic conductors and produce a synergic effect among catalytic activity, conductivity, and biocompatibility has been achieved.

Application of Surface Raman enhanced Scattering (SERS) in drugs analysis

The Surface Raman enhanced Scattering (SERS) have attracted considerable attention for the sensitive detection of a variety of biological and pharmaceutical compounds. It is one of the most important methods for the detection and characterization of drugs in pharmaceutical samples. SERS is a very promising method for investigating the pharmaceutical compounds, due to its an ability to provide information about chemical structural and physical properties and identifies substances from the characteristic spectra [35]. The major advantage of SERS over other spectroscopic techniques is that SERS is a molecularly specific technique producing spectra, which has sharp peaks, whereas, for example, fluorescence spectra is broad, overlapping, and less specific for a particular molecule [36]. The average enhancement factor of Raman signals by SERS has been recorded in excess of 1010 for the detection of the analyte on the surface of nanomaterials, which is related to the excitation of surface plasmon resonance on substrates as a result of the interactions between adsorbents and metals [37].

SERS involves adsorption of molecules onto the substrate surface. SERS enhancement has an influence on the type of metallic substrates. Most common metals used are gold, silver, and copper nanoparticles. Among them, the silver metal is the most common type used as SERS substrates, due to its stability in the air, and very strong surface Plasmon resonance in UV-vis, and near IR range. The silver nanoscale nm display localized surface Plasmon's resonance that can be excited with visible light, causing a high enhancement compared with all the metals. However, silver nanoparticles have a strong tendency to aggregate over storage time, which leads to low detection reproducibility and reliability.

The enhancement can be explained by two mechanisms; chemical enhancement, and electromagnetic enhancement. The chemical effects are contributing the minor part of the enhancement magnitude, while the electromagnetic effect is dominant of the SERS signal. The electromagnetic enhancement is dependent on the roughness that present metal surface, which is related to the surface Plasmon resonance of the metal surface. The electromagnetic enhancement involves excites surface Plasmon on the metal, due to the incident laser irradiates on the metal surface. This excitation surface Plasmon leads to generate a strong electromagnetic field on the metal surface that magnifies the incident laser and the Raman scattering. The electromagnetic enhancement is generally of the order of 106-108 . While the chemical enhancement is dependent on charge transfer excitation between the adsorbent and metal surfaces through their bonds, which can occur by transfer one electron from the highest occupied to the Fermi level of the metal, or by transfer one electron from the Fermi level of the metal to the lowest unoccupied molecular orbital. These charge transfers cause a change in the polarizability of the molecule. The chemical enhancement can be normally achieved up to 102-103 .

On the other side, electrochemical methods have many advantages like easy handling, short analysis time, very sensitive, no use of organic solvent, the ability to detect multiple analytes without separation steps, the ability to analyze targets within biological matrices, including sweat or urine when compared with other techniques. Electrochemical methods have been shown to be excellent in the pharmaceutical formulation, and for the determination of the drug in bulk structure. Therefore, many of the studies have been reported to pharmaceutical analysis, including the voltammetric determination of antiamoebic, capecitabine, sedatives, antiadrenergic, ketoconazole, clotrimazole, and piperazine. Moreover, the electrochemical methods are very helpful techniques to study the reaction mechanism. Redox properties of a pharmaceutical compound can give insights into its metabolic fate or pharmaceutical activity. The important idea in electrochemical studies is based on modifying working electrodes by nanomaterials like silver, and gold nanoparticles, which provide high surface area, electronic and mechanical properties, increase the rate of electron transfer.

Hyphenated techniques

The coupling of a separation technique and on-line separation technique leads to the development of a hyphenated technique. The last two decades saw a remarkable advancement in the hyphenated techniques and its application in pharmaceutical analysis. A variety of hyphenated techniques such as liquid chromatography combined with mass spectrometry, gas chromatography combined with mass spectrometry, liquid chromatography - nuclear magnetic resonance spectroscopy, capillary electrophoresis inductively coupled plasmamass spectroscopy and capillary electrophoresis with mass spectrometry have been applied in the analysis of pharmaceuticals. The determination of drugs in biological materials is an important step in drug discovery and drug development. The determination of drugs in biological materials is an important step in drug discovery and drug development. HPLC together with various types of detection such as ultraviolet, fluorescence,and mass spectrometry has become the method of choice for bioanalytical method development [38]. HPLC with UV or MS/MS‘ detection is presented for the analysis of meloxicam in biological samples and pharmaceutical formulations [39]. Liquid chromatography-electrospray ionization–mass spectrometry method for the qualitative and quantitative determination of metabolites after oral administration of Rhizome coptidis and Zuojinwan preparation in rat urine has been developed. Other techniques include matrix-assisted laser-desorption ionization time-of-flight mass spectrometry (MALDI-TOF MS), and fluorescence. One of these methods is matrix-assisted laser-desorption ionization time-of-flight mass spectrometry (MALDI-TOF MS), which is a powerful technique for DNA analysis. MALDI-TOF MS approaches have been developed for rapid screening of single nucleotide polymorphisms (SNPs), epigenotype analysis, quantitative allele studies, and for the discovery of new genetic polymorphisms. These methods are based on single base primer extension and minisequencing implemented with new chemicals using MALDI-TOF MS and include photochemical and other chemical and enzyme cleavage strategies that facilitate sample automation and MS analysis for real-time genotyping and resequencing screening [40-43].

Acknowledgment

The authors would like to acknowledge the support provided by King Abdulaziz City for Science and Technology (KACST) through project No. A.T.34-8. The authors would like also to acknowledge the support by King Fahd University of Petroleum and Minerals (KFUPM).

References

Select your language of interest to view the total content in your interested language
Post your comment

Share This Article

Relevant Topics

Recommended Conferences

  • International Conference on Renewable Energy and Resources
    Vancouver, British Columbia, Canada
  • 2nd International Conference on Biochemistry
    September 28-29, 2017 Dubai, UAE
  • 4th International Conference on Green Energy & Expo
    Las Vegas, Nevada, USA

Article Usage

  • Total views: 8244
  • [From(publication date):
    June-2016 - Mar 31, 2017]
  • Breakdown by view type
  • HTML page views : 8151
  • PDF downloads :93
 

Review summary

  1. Lilah
    Posted on Aug 11 2016 at 11:33 am
    Tawfik A. Saleh reviewed the application of nanomaterial for drug determination. The article provides update knowledge regarding the current status of methods of synthesis of nanomaterials, their characterization as well as prospective drug applications. The article stirs the innovative concept of nanobiomedicine and will help in the development of novel and highly efficient drugs in future.
 

Post your comment

captcha   Reload  Can't read the image? click here to refresh

OMICS International Journals
 
Make the best use of Scientific Research and information from our 700 + peer reviewed, Open Access Journals
OMICS International Conferences 2016-17
 
Meet Inspiring Speakers and Experts at our 3000+ Global Annual Meetings

Contact Us

Agri, Food, Aqua and Veterinary Science Journals

Dr. Krish

agrifoodaquavet@omicsonline.com

1-702-714-7001 Extn: 9040

Clinical and Biochemistry Journals

Datta A

clinical_biochem@omicsonline.com

1-702-714-7001Extn: 9037

Business & Management Journals

Ronald

business@omicsonline.com

1-702-714-7001Extn: 9042

Chemical Engineering and Chemistry Journals

Gabriel Shaw

chemicaleng_chemistry@omicsonline.com

1-702-714-7001 Extn: 9040

Earth & Environmental Sciences

Katie Wilson

environmentalsci@omicsonline.com

1-702-714-7001Extn: 9042

Engineering Journals

James Franklin

engineering@omicsonline.com

1-702-714-7001Extn: 9042

General Science and Health care Journals

Andrea Jason

generalsci_healthcare@omicsonline.com

1-702-714-7001Extn: 9043

Genetics and Molecular Biology Journals

Anna Melissa

genetics_molbio@omicsonline.com

1-702-714-7001 Extn: 9006

Immunology & Microbiology Journals

David Gorantl

immuno_microbio@omicsonline.com

1-702-714-7001Extn: 9014

Informatics Journals

Stephanie Skinner

omics@omicsonline.com

1-702-714-7001Extn: 9039

Material Sciences Journals

Rachle Green

materialsci@omicsonline.com

1-702-714-7001Extn: 9039

Mathematics and Physics Journals

Jim Willison

mathematics_physics@omicsonline.com

1-702-714-7001 Extn: 9042

Medical Journals

Nimmi Anna

medical@omicsonline.com

1-702-714-7001 Extn: 9038

Neuroscience & Psychology Journals

Nathan T

neuro_psychology@omicsonline.com

1-702-714-7001Extn: 9041

Pharmaceutical Sciences Journals

John Behannon

pharma@omicsonline.com

1-702-714-7001Extn: 9007

Social & Political Science Journals

Steve Harry

social_politicalsci@omicsonline.com

1-702-714-7001 Extn: 9042

 
© 2008-2017 OMICS International - Open Access Publisher. Best viewed in Mozilla Firefox | Google Chrome | Above IE 7.0 version