alexa Rapid Prototyping Technology in Bone Tissue Engineering | Open Access Journals
ISSN: 2168-9873
Journal of Applied Mechanical Engineering
Make the best use of Scientific Research and information from our 700+ peer reviewed, Open Access Journals that operates with the help of 50,000+ Editorial Board Members and esteemed reviewers and 1000+ Scientific associations in Medical, Clinical, Pharmaceutical, Engineering, Technology and Management Fields.
Meet Inspiring Speakers and Experts at our 3000+ Global Conferenceseries Events with over 600+ Conferences, 1200+ Symposiums and 1200+ Workshops on
Medical, Pharma, Engineering, Science, Technology and Business

Rapid Prototyping Technology in Bone Tissue Engineering

Md Enamul Hoque1* and R.G.S.V Prasad2
1Department of Mechanical, Materials and Manufacturing Engineering, University of Nottingham Malaysia Campus, JalanBroga, Semenyih, Selangor, Malaysia
2Biomedical and Pharmaceutical Technology Research Group, Nano Research for Advanced Materials, Bangalore, Karnataka, India
Corresponding Author : Md Enamul Hoque
Department of Mechanical, Materials and Manufacturing Engineering
University of Nottingham Malaysia Campus
Jalan Broga, Semenyih, Selangor, Malaysia
Tel: +6 016 2690 62
E-mail: enamul.hoque@nottingham.edu.my
Received December 12 2013; Accepted December 12, 2013; Published December 20, 2013
Citation: Hoque ME, Prasad RGSV (2013) Rapid Prototyping Technology in Bone issue Engineering. J Appl Mech Eng 2:e124. doi:10.4172/2168-9873.1000e124
Copyright: © 2013 Hoque ME, et al. This is an open-access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.

Visit for more related articles at Journal of Applied Mechanical Engineering

Tissue engineering/regenerative medicine promises to solve problems in organ transplantation crisis. Autogenous bone grafting is considered to be the gold standard for the treatment and management of bone defects like, craniofacial disorders and orthopedic conditions such as, fractures and nonunions. 3D polymeric scaffolds can mimic the natural extracellular matrix of bone. Designing a scaffold with the required properties is a key factor that governs the bone tissue engineering. Complex porous 3D structures are fabricated by various processes like, foaming [1], salt leaching [2], emulsification [3] etc. However, scaffolds fabricated by these conventional methods can only justify partial requirements of tissue engineering approaches. The major drawbacks of these procedures include lack of control in morphological characteristics like, pore shape, size,distribution and pore connectivity. One of the recent techniques that add complexity reminiscent of tissue engineering is RapidPrototyping (RP) technology, which arranges/deposits drops or fibres of polymeric materials in required geometry. RP technology helps in designing 3D parts which are built layer-by-layer based on a Computer AidedDesign (CAD) file [4-6]. By far, there are number of commercial RP techniques available for different materials. This technique is best suited to directly generate complex-shaped porous scaffolds with well controlled internal structures. The material choice is very flexible as long as it can produce osteogenic effect. One of the widely studied materials for bone tissue regeneration is powder based bioceramic like, HydroxyApatite (HA) [7]. In this method ceramic powder is printed with a binder solution (usually a polymer-based binder solution). This slurry is now deposited layer-by-layer according to the design producing 3D scaffolds. The scaffolds generated by this process can withstand high pressures of 22 MPa, which is essential for bone tissue engineering. The cells are seeded onto the 3D scaffolds and nurtured until they are sufficiently grown. The cell construct (scaffold along with cells) can then be implanted to the defect site for the regeneration of the bone. Hence, RP technology can be considered to be an ideal process for fabricating bone tissue engineering scaffolds.
References







 
Select your language of interest to view the total content in your interested language
Post your comment

Share This Article

Relevant Topics

Recommended Conferences

Article Usage

  • Total views: 11721
  • [From(publication date):
    December-2013 - Apr 29, 2017]
  • Breakdown by view type
  • HTML page views : 7974
  • PDF downloads :3747
 
 

Post your comment

captcha   Reload  Can't read the image? click here to refresh

Peer Reviewed Journals
 
Make the best use of Scientific Research and information from our 700 + peer reviewed, Open Access Journals
International Conferences 2017-18
 
Meet Inspiring Speakers and Experts at our 3000+ Global Annual Meetings

Contact Us

Agri, Food, Aqua and Veterinary Science Journals

Dr. Krish

agrifoodaquavet@omicsonline.com

1-702-714-7001 Extn: 9040

Clinical and Biochemistry Journals

Datta A

clinical_biochem@omicsonline.com

1-702-714-7001Extn: 9037

Business & Management Journals

Ronald

business@omicsonline.com

1-702-714-7001Extn: 9042

Chemical Engineering and Chemistry Journals

Gabriel Shaw

chemicaleng_chemistry@omicsonline.com

1-702-714-7001 Extn: 9040

Earth & Environmental Sciences

Katie Wilson

environmentalsci@omicsonline.com

1-702-714-7001Extn: 9042

Engineering Journals

James Franklin

engineering@omicsonline.com

1-702-714-7001Extn: 9042

General Science and Health care Journals

Andrea Jason

generalsci_healthcare@omicsonline.com

1-702-714-7001Extn: 9043

Genetics and Molecular Biology Journals

Anna Melissa

genetics_molbio@omicsonline.com

1-702-714-7001 Extn: 9006

Immunology & Microbiology Journals

David Gorantl

immuno_microbio@omicsonline.com

1-702-714-7001Extn: 9014

Informatics Journals

Stephanie Skinner

omics@omicsonline.com

1-702-714-7001Extn: 9039

Material Sciences Journals

Rachle Green

materialsci@omicsonline.com

1-702-714-7001Extn: 9039

Mathematics and Physics Journals

Jim Willison

mathematics_physics@omicsonline.com

1-702-714-7001 Extn: 9042

Medical Journals

Nimmi Anna

medical@omicsonline.com

1-702-714-7001 Extn: 9038

Neuroscience & Psychology Journals

Nathan T

neuro_psychology@omicsonline.com

1-702-714-7001Extn: 9041

Pharmaceutical Sciences Journals

John Behannon

pharma@omicsonline.com

1-702-714-7001Extn: 9007

Social & Political Science Journals

Steve Harry

social_politicalsci@omicsonline.com

1-702-714-7001 Extn: 9042

 
© 2008-2017 OMICS International - Open Access Publisher. Best viewed in Mozilla Firefox | Google Chrome | Above IE 7.0 version